Advidia A-200 Uživatelský manuál stáhnout pdf (Strana 29)

Figure 5-3

Time Zone Settings

 Synchronizing Time by NTP Server.

(1) Check the checkbox to enable the NTP function.

(2) Configure the following settings:

Server Address: IP address of NTP server.

NTP Port: Port of NTP server.

Interval: The time interval between the two synchronizing actions with NTP

server.

Figure 5-4

Time Sync by NTP Server

Note: If the camera is connected to a public network, you should use a NTP server

that has a time synchronization function, such as the server at the National Time

Center (IP Address: 210.72.145.44). If the camera is set in a customized network, NTP

software can be used to establish a NTP server for time synchronization.

 Synchronizing Time Synchronization Manually

Enable the Manual Time Sync function and then click to set the system time

from the pop-up calendar.

Note: You can also check the Sync with computer time checkbox to synchronize the

time of the camera with that of your computer.

Figure 5-5

Time Sync Manually

 Click the tab page to enable the DST function and Set the date of the

DST period.

Figure 5-6

DST Settings

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 79 80

Žádné komentáře

Advidia A-200 Uživatelský manuál Strana 29